Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Evans, CO
We provide independent Gelco chimney cleaning and service across Evans, and we’re not affiliated with the manufacturer – which means our recommendations follow what your cap, insert, and flue actually show, not a dealer program. What makes our Gelco work here different is that we treat Evans as two chimney markets, not one: aging masonry bungalows near US-85 and newer prefab fireplace subdivisions east toward the river each get a scope matched to how they fail. Call (833) 740-1407 to book a sweep and inspection. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Evans Residents Choose Us for Gelco Service
Gelco caps, inserts, and factory-built components turn up on plenty of homes around Evans, and we work on them every burn season. We know how these units age in Weld County conditions: how the storm collars loosen after a run of plains gusts, how refractory panels crack through freeze-thaw cycling, and how insert flues glaze over when a damper gets choked down during a cold snap.
We specify materials by name because what goes inside your chimney matters as much as the labor. That’s why we work with professional-grade brands like DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield alongside Gelco components where they’re still available. Scheduling is straightforward: you tell us what the fireplace is doing, we book a sweep and inspection, and we explain what we find before any work begins. One call covers the sweep, the inspection, and any repair, so you’re not handing your chimney off to a second company to follow up on findings.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Evans
These are the Gelco issues we run into most around Evans, and each one ties back to how the local climate and housing stock treat the equipment.
- Loose storm collars and caps on factory-built units. In the newer subdivisions east toward the river, persistent plains gusts work fasteners and seams loose over a few seasons. A rattling cap or a collar that’s pulled away from the chase is the usual first sign, and it lets water and downdrafts in.
- Cracked refractory panels after hard freezes. Gelco prefab fireplaces along the South Platte valley go through repeated heat-up and cool-down cycles, and an Arctic front can finish off a panel that was already stressed. Cracked refractory is a safety issue, not a cosmetic one.
- Heavy creosote glazing inside insert flues. During cold snaps, dampers get choked down and flue temperatures drop below the range that keeps deposits dry. The result is glazed creosote that a standard brushing pass won’t fully clear.
- Seized or warped damper and glass-door hardware on older inserts. Units that have run wood with high moisture content tend to show sticky dampers and warped door assemblies. We check the hardware during the sweep so it doesn’t fail mid-season.
- Spalling clay tile behind a masonry flue serving an insert. On the older bungalows near US-85, an insert vented into a clay-tile flue often sits behind tile that’s breaking down from years of wood burning. That changes the job from cleaning to relining.
Gelco Service in Evans: What Local Conditions Mean for Your Equipment
Evans packs two different chimney problems into one small city, and that split is the single most useful thing to understand about service here. The older bungalows along the US-85 corridor carry masonry flues with years of wood-burning wear, and what shows up on inspection is spalling clay flue tile – tile faces flaking and breaking down from the inside. The 1990s-2010s subdivisions pushing east toward the river are a different story: prefab metal fireplaces with Gelco inserts that fail at the refractory panel and storm collar instead. For a Gelco owner, that means the failure you should expect depends on which side of Evans you live on. A cracked refractory panel or a loose collar on the east side calls for a component replacement; a spalling masonry flue downtown calls for relining. Same city, same brand, two completely different scopes.
Gelco Models & Products We Service in Evans
We service the Gelco products that show up in Evans homes: wood-burning fireplace inserts, factory-built fireplace units with stainless liners, multi-flue and custom chase caps, and glass door and screen assemblies. Each one gets inspected on its own terms, because a cap problem and a firebox problem need different parts and different labor.
For parts, we use OEM Gelco components where they’re still available for caps, dampers, refractory panels, and door hardware. When the OEM part is discontinued, we turn to quality aftermarket stainless liners and caps that fit the unit properly rather than forcing something that doesn’t belong. We don’t claim to be a Gelco dealer or factory-authorized – we’re an independent shop, and we’ll tell you plainly which route makes sense for your equipment.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Evans
Chimney work is priced per job by a written estimate, and the estimate is free. What drives the number is what we find: a straightforward sweep on a prefab unit with a sound cap sits at the low end, while a sweep that turns up glazed creosote, a cracked refractory panel, or a spalling masonry flue moves into repair territory. Cap and collar replacement, refractory panel swaps, and relining are quoted separately once we’ve seen the condition.
- Sweep and inspection: quoted per job after we see the flue and firebox
- Cap or storm collar replacement: quoted separately based on the unit and cap type
- Refractory panel or damper hardware: quoted after inspection
- Relining where the masonry flue has failed: quoted as its own scope
Nothing gets recommended without evidence you can see – we show you the photo report from the camera inspection and explain what can safely wait. Call (833) 740-1407 for a free estimate.
Serving Evans, CO – Our Local Coverage Area
We serve Evans and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Evans
Hard freezes along the South Platte valley stress refractory panels and firebox brick through rapid heat-up and cool-down cycling, and the temperature swings from mild chinook days to sub-zero nights make it worse. That cycling is what cracks panels that were already weakened. An inspection after a cold stretch catches it before the next burn season.
Yes, and the scope differs substantially. A masonry flue in an older US-85 corridor bungalow usually needs a Level 2 inspection to check the clay tile for spalling, and if the tile has failed the answer is relining. A newer Gelco prefab fireplace east toward the river typically needs a sweep plus a close look at the cap, storm collar, and refractory panel – cleaning and component replacement rather than relining. Call (833) 740-1407 and we’ll book the right scope for your house.
Most Evans wood inserts want a sweep tied to the fall burn season, before you light the first fire, rather than a set-it-and-forget-it annual date. In a valley that swings from mild days to sub-zero nights, creosote builds in freeze-thaw cycles, so the amount you burned last winter matters more than the calendar. If you’ve burned heavily or run unseasoned wood, book sooner.
In most cases, yes. A loose or wind-damaged cap and storm collar on a Gelco factory-built unit is a component replacement, not a chimney rebuild, and we use OEM Gelco parts where they’re still available or a quality aftermarket stainless cap when they aren’t. We confirm the condition during inspection and quote it before any work starts.
Usually not. A Level 1 inspection is a basic visual check of readily accessible parts, but a sale or a new insert install calls for a Level 2 inspection that includes the flue interior with a camera. That gives buyers, sellers, and insurers documentation they can rely on. Call (833) 740-1407 to schedule a standalone inspection.
Service Areas Near Evans
We also serve homeowners in Fort Collins, Timnath, Loveland, Windsor, Wellington, and Severance, plus the communities around Milliken and Eaton. If you’re just outside Evans and want Gelco service, call and we’ll confirm coverage for your address.
Book Your Gelco Service in Evans Today
Whether your Gelco insert needs a fall sweep, a Level 2 inspection, or a cap and collar replacement after a windy cold front, one call covers the sweep, the inspection, and the repair. Call (833) 740-1407 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fort Collins.