Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Fort Collins Homeowners
A cracked crown, a rusted cap, or a liner that’s seen better days can turn a working fireplace into a source of smoke, water damage, and worry. Chimney repair in Fort Collins is about finding that problem exactly, then fixing it with materials that hold up through Colorado’s freeze-thaw cycles. Our technicians have up to 15 years of experience, and they focus only on chimneys. One call covers the sweep, the inspection, and the repair, so you never hand off findings to a second company. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 740-1407 and we’ll tell you exactly what we found and exactly what it costs to fix it, before any work begins.
Chimney Cap Installation
Chimney Cap Installation is the fitting of a protective cover over the flue opening, and it’s the cheapest defense your chimney has against rain, snow, birds, and squirrels. You need one if your flue is open to the sky, if you’ve heard scratching or found nesting debris, or if water is getting in during storms. A cap also keeps sparks from landing on the roof. We fit caps sized to the flue, not a universal lid that rattles loose in Front Range wind. Typical cost in Fort Collins runs $150-$400 depending on flue count and cap material, and the written estimate sets the final price.
Single-Flue and Multi-Flue Caps
A single-flue masonry chimney takes a straightforward cap anchored into the crown. Multi-flue chimneys need one wide cap with a screened skirt over each opening. We measure the whole top rather than guessing from the ground.
Screen and Animal Guard Options
The screen mesh matters more than people expect: too coarse and birds get through, too fine and draft suffers. We match mesh size to the flue and the local bird pressure. Heavier stainless guards cost more but last longer than painted steel.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement means pulling off a cap that’s failed and setting a new one, and it’s usually cheaper than the water damage a bad cap lets in. You need it when the old cap is rusted through, dented from a limb, missing screens, or pulling loose from its anchors. A loose cap can also walk off in high wind, which is a real risk on exposed Fort Collins roofs. We inspect the crown while the old cap is off, since damage underneath is common and easy to miss. Replacement typically runs $200-$500 in Fort Collins depending on size and material, with the written estimate setting the final figure.
Rust and Corrosion Failures
Painted steel caps fail faster than stainless in this climate, and once rust eats the seams the cap is done. We point that out plainly rather than patching a cap that’s near the end of its life. Stainless usually costs more up front and less over the long run.
Storm and Impact Damage
Hail and falling branches are the usual culprits for a dented or knocked-off cap. Bent caps warp the screens and lose their seal over the flue. We reset anchors properly so the new cap holds through the next storm.
Chimney Liner Installation
Chimney Liner Installation is putting a proper flue lining inside the chimney to contain heat and combustion gases, and it’s the repair that matters most for safety. You need it when the existing clay tiles are cracked or spalling, when there’s no liner at all in an older chimney, or when a new appliance calls for a correctly sized flue. We install DuraFlex flexible stainless systems for relining jobs, so those are handled in-house rather than subcontracted. Liner installation in Fort Collins typically runs $2,200-$5,500 depending on height, flue size, and liner type. The written estimate sets the final price.
Flexible Stainless Relining
DuraFlex flexible liners let us line a flue with offsets and bends that rigid pipe can’t follow. They’re suited to masonry chimneys where the original tile is compromised. Sizing is matched to the appliance before anything goes in.
Insulation and Draft
An insulated liner wrap keeps flue gases hotter and reduces creosote condensation on cold walls. It also improves draft on shorter chimneys. We’ll explain when insulation is worth the extra cost and when it isn’t.
Chimney Flashing Repair
Chimney Flashing Repair is fixing the metal where the chimney meets the roof, and it’s the leak source we find most often on older Fort Collins homes. You need it when you see water stains on the ceiling near the chimney, rusted or lifted flashing, or gaps where the sealant has dried and pulled away. Snowmelt and refreezing work at that joint every winter. We reseal, re-set, or replace flashing depending on how far the failure has gone, and we check the surrounding shingles at the same time. Flashing repair typically runs $300-$900 depending on the roof pitch and the extent of the damage, with the written estimate setting the final price.
Tracing a Roof Leak
Not every ceiling stain means flashing, but the flashing joint is where we check first. We look for lifted step flashing, failed counter-flashing, and cracked sealant lines. Finding the real entry point saves you from paying twice.
Sealant, Metal, and Shingle Details
Caulk alone is a short-term fix where metal has pulled loose. Proper repair means re-forming or replacing the flashing and tying it back into the shingles. We match materials to your roof rather than forcing one approach.
Chimney Crown Repair
Chimney Crown Repair is fixing the concrete cap at the very top of the masonry that sheds water away from the flue, and a cracked crown is a common cause of hidden water damage. You need it when you see cracks wider than a hairline, crumbling concrete, or water finding its way down inside the chimney. Freeze-thaw cycles widen those cracks a little more every winter in Fort Collins. We repair minor cracking or rebuild the crown when the damage has gone deeper, and we never just paint over a failing crown. Crown repair typically runs $350-$1,200 depending on how much rebuild is needed, and the written estimate sets the final price.
Hairline Cracks Versus Structural Fails
Small shrinkage cracks are normal and often sealed. Wide cracks, split edges, or a crown pulling away from the flue need rebuilding. We tell you which one you have before quoting.
Overhang and Slope
A crown needs enough overhang and slope to throw water clear of the masonry. Many older crowns were poured too flat. Rebuilding with a proper pitch prevents the same failure from coming back.
Chimney Repair Companies
Chimney Repair Companies vary a lot in what they actually do, and the difference matters when a mason, a roofer, and a sweep each tell you something different. You need to compare carefully when a quote is vague, when nobody will put findings in writing, or when a repair is recommended with no visible evidence behind it. We’re a full-service chimney specialist, not a generalist with a brush: the company that finds the problem is the same one that fixes it. A specialist sweep across Fort Collins is the base layer of every job, so we start there and document what we see. Costs depend entirely on the repair, and the written estimate sets the final price.
What to Ask Before Hiring
Ask whether the company does the repair itself or subcontracts the liner and masonry work. Ask to see the camera findings before agreeing to anything. Ask for the price in writing, itemized by repair.
Why Specialists Differ From Handymen
Chimney work is its own trade, and a handyman who does gutters and HVAC rarely carries the materials a real repair needs. Masonry, liners, crown work, and firebox resurfacing all call for specific systems. We specify materials by name because what goes inside your chimney matters as much as the labor.
Chimney Masonry Repair
Chimney Masonry Repair is rebuilding or repointing the brick and mortar above the roof, and it’s the work that keeps a chimney standing straight through Colorado weather. You need it when mortar joints are crumbling, bricks are spalling or flaking, or the chimney is visibly leaning. Water gets into failed mortar, freezes, and pushes the masonry apart a little more each season. We handle repointing, brick replacement, and full rebuilds, and we can restore a damaged firebox with HeatShield rather than a quick patch. Masonry repair in Fort Collins typically runs $600-$4,500 depending on the scope, with the written estimate setting the final price.
Repointing Mortar Joints
Repointing means grinding out failed mortar and packing in fresh material matched to the existing brick. Soft modern mortar on old hard brick causes spalling, so matching matters. It’s cheaper than a rebuild when the brick itself is still sound.
Spalling Brick and Rebuilds
Spalling brick has a flaking face and a crumbling body, and repointing alone won’t save it. When enough of the chimney is failing, a partial or full rebuild is the honest answer. We’ll show you the extent before recommending it.
Brands We Service
We work with professional-grade chimney products, and the brands we specify tell you something about the materials going into your repair. DuraFlex flexible stainless liners handle relining jobs where the flue has bends or offsets, and we know where those systems wear. HeatShield is a specialized resurfacing system for firebox restoration that most general contractors don’t carry or know how to apply, and it’s a real repair rather than a cosmetic patch.
We also work with Gelco and Olympia Chimney products for caps, dampers, and related components, matching the right part to your flue rather than forcing a universal fit. Famco caps and accessories are another option when they suit the chimney. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, or Famco components, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water stains on the ceiling or chimney breast. Dark streaks usually point to flashing, a crown, or a cap failure letting water in. Left alone, that moisture rots framing and masonry from the inside.
- Crumbling mortar or flaking brick. You can often spot this from the ground with binoculars. Spalling brick and soft joints mean the chimney is losing its structure a little each winter, and it doesn’t fix itself.
- A cracked or separated crown. A visible crack at the top lets water straight into the chimney. Small cracks are quick to seal; wide ones need rebuilding before the damage spreads.
- Smoke that rolls back into the room. Backdrafting can mean a blocked flue, a sizing problem, or a draft issue. It’s worth a look before you light another fire, since smoke should leave, not linger.
- Loose or missing cap and screens. An open flue invites birds, squirrels, and rain. A cap that’s walking loose can also come off in wind, so it’s worth checking.
Our Process, Step by Step
- 1
Book the visit and get a flat price agreed before we arrive. We confirm what you’re seeing, agree the sweep price up front, and set a window. No surprise add-ons on the day.
- 2
Camera inspection of the flue and firebox. We run a camera down the flue and photograph what we find, including the crown, cap, and flashing from the roof. You see the images, not just a description.
- 3
Walk you through the findings with the photos in hand. We point out what’s failing and what’s fine, and we say plainly when a repair can safely wait. Nothing gets recommended without camera evidence you can see for yourself.
- 4
Written estimate, itemized by repair. Each repair is priced separately so you can decide what to do now and what to schedule later. The written estimate sets the final price.
- 5
Do the work and confirm it. We install the materials we specified by name, from liners to caps to masonry, and we show you the finished result. Single-source accountability means one company from start to finish.
How Much Does Chimney Repair Cost in Fort Collins?
Chimney repair in Fort Collins has a wide range because the repairs themselves vary so much. A typical cap installation runs $150-$400 depending on flue count and material. Cap replacement sits around $200-$500. Flashing repair usually lands at $300-$900 depending on roof pitch and how far the failure has spread. Crown repair runs $350-$1,200 depending on how much rebuild is needed. Masonry repair is the biggest variable at $600-$4,500, split between repointing and full rebuilds. Liner installation is the largest single job at $2,200-$5,500, driven by chimney height, flue size, and liner type.
What affects the price is mostly access, height, and how much of the chimney has actually failed. A short chimney with sound brick is cheaper to work on than a tall one with offsets or a steep roof pitch. To avoid overpaying, get the findings in photos before you agree to any repair, and ask for the price itemized by task. Beware of a quote that bundles liner work with no camera evidence or a vague “while we’re up there” add-on.
Our estimate is free and comes with a flat price agreed before booking, a camera inspection, and a photo report you keep. The written estimate sets the final price, and nothing gets recommended that the evidence doesn’t support.
Our Service Area Near Fort Collins
We serve Fort Collins and the surrounding northern Colorado towns, including Timnath, Loveland, Windsor, Wellington, Severance, Johnstown, Eaton, Berthoud, Milliken, Evans, and Mead. If you’re just outside one of those, call and we’ll confirm coverage. Dispatch runs from 7am to 7pm, Sunday through Friday, so scheduling near Fort Collins is usually quick. For homes nearby, our chimney repair page covers what we see in Timnath, and our chimney repair page covers Loveland.
Serving Fort Collins, CO – Our Local Coverage Area
We serve Fort Collins and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Fort Collins
Chimney repair is the fixing of the parts of a chimney that have failed: the cap, crown, flashing, masonry, or liner. It’s separate from sweeping, which clears creosote, and from inspection, which documents condition. We handle all three, so a finding turns into a repair without a handoff. Call (833) 740-1407 for an exact quote; estimates are free.
Most single repairs finish in a few hours, while liner installation or a masonry rebuild can take a full day or more. Cap and flashing work is usually quick; crown and masonry repairs depend on how much rebuild is needed. We give you a realistic time window with the estimate. Call (833) 740-1407 and we’ll book you an opening.
Most chimney repairs in Fort Collins run from a few hundred dollars for a cap or flashing fix up to several thousand for liner installation or a masonry rebuild. The written estimate sets the final price, and it’s itemized so you can see what each repair costs. Nothing is recommended without camera evidence you can see. Call (833) 740-1407 for an exact quote; estimates are free.
Yes. We install DuraFlex flexible stainless liners for relining jobs and use HeatShield for firebox restoration, along with Gelco, Olympia Chimney, and Famco components where they suit the chimney. Using professional-grade materials from recognized brands is part of how we work. Call (833) 740-1407 to talk through what your chimney needs.
Same-day service is often possible when you call early. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (833) 740-1407 and we’ll book you in.
Workmanship and material coverage depend on the specific repair, and we’ll put the details in writing. Ask when we give you the estimate, and we’ll spell out exactly what’s covered. That’s part of the single-source accountability you get from one company doing the whole job. Call (833) 740-1407 to ask about coverage on your repair.
Clear the area around the fireplace, move any fragile items off the hearth, and make sure we can reach the roof if access is needed. If you have pets, keep them out of the work area during the visit. Tell us what you’ve noticed, including smoke, odors, or leaks. Call (833) 740-1407 to book and we’ll confirm what to expect.
Schedule Your Chimney Repair Service in Fort Collins Today
If your chimney is showing cracks, leaks, or a cap that’s seen better days, get it looked at before the season turns. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and estimates are free. Our technicians have up to 15 years of experience, and one call covers the sweep, the inspection, and the repair. Call (833) 740-1407 for a no-obligation estimate and a clear, itemized price.
Written by the team at Chimney Sweep Fort Collins.