Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Fort Collins?
Chimney repair in Fort Collins typically costs $350 to $1,200 for common fixes like crown repair, flashing resealing, or firebox resurfacing, while a full stainless liner installation runs $2,800 to $6,500 depending on height and liner diameter. Masonry rebuilds above the roofline start around $3,500 and climb past $9,000 for a full chimney tear-down and rebuild. The written estimate you get before any work starts sets the final price, and our estimates are free.
We’re a full-service chimney specialist, not a generalist with a brush. That matters on pricing: the same company that sweeps and inspects your chimney is the one that repairs it, so you don’t pay twice for two different trades to look at the same flue. One call covers the sweep, the inspection, and the repair.
Key Takeaways
- Most Fort Collins chimney repairs land between $350 and $1,200.
- Liner installation with DuraFlex runs $2,800 to $6,500.
- Firebox resurfacing with HeatShield costs $600 to $1,400 and beats a quick patch.
- Crown and flashing repairs are the most common fixes we quote.
- Free estimates, upfront pricing, and a written scope before work begins.
Chimney Repair Cost Breakdown (2026)
Here’s how the numbers break down by job type for the Fort Collins market. Treat these as typical ranges; the written estimate is what counts.
| Repair Type | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney crown repair or rebuild | $450 – $1,400 | Sealing cracks or replacing the concrete crown |
| Flashing repair or replacement | $350 – $900 | Resealing or replacing the roof-to-chimney seal |
| Tuckpointing (mortar joint repair) | $500 – $1,800 | Repointing deteriorated mortar joints |
| Firebox resurfacing (HeatShield) | $600 – $1,400 | Resurfacing cracked or spalled firebox walls |
| Stainless liner installation (DuraFlex) | $2,800 – $6,500 | Flexible stainless relining of the flue |
| Partial masonry rebuild (above roofline) | $3,500 – $7,000 | Rebuilding the stack above the roof |
| Full chimney rebuild | $6,000 – $9,500+ | Tear-down and rebuild of the whole chimney |
| Chimney cap installation | $200 – $550 | Stainless or copper cap with mesh screening |
What pushes a quote toward the top of a range is usually access and scope. A chimney on a steep roof or a tight side yard takes longer to work on safely. A crack that looks small on the surface often reveals a bigger problem once the chimney is opened up, and a liner that’s failed at the joints means a full reline rather than a spot repair. The material you choose moves the number too: a stainless DuraFlex liner and a properly applied HeatShield firebox resurfacing cost more than a patch, and they last far longer.
What Affects Chimney Repair Pricing in Fort Collins
Fort Collins sits at the base of the foothills, and that geography shapes chimney wear in ways a coastal or flatland climate doesn’t. Our winters swing hard between freeze and thaw, and that cycle works on masonry mortar all season. Several factors move the price on any given job:
- Freeze-thaw damage to mortar and brick. Water gets into small cracks, freezes, expands, and widens them over a season. By the time a joint looks bad, the mortar behind it often needs full repointing, not a cosmetic touch-up. That’s why tuckpointing quotes here vary so much.
- Roof pitch and access. A chimney on a low-slope roof is faster to reach than one on a steep pitch. Fort Collins homes near the foothills often sit on sloped lots, and a chimney tucked against a tall gable adds setup time to any repair.
- Age and construction of the chimney. Older masonry chimneys in the neighborhoods around Old Town and along the city’s established blocks are more likely to need structural work, while newer builds tend to need flashing and cap fixes.
- Liner condition and flue size. A failed liner is the single biggest driver of a repair bill. The diameter of the flue and the height of the chimney both affect the length of DuraFlex liner required.
- Firebox condition. Cracks and spalling in the firebox get worse with heavy use. HeatShield resurfacing restores the firebox without a full rebuild, but the extent of the damage decides the cost.
- Whether the problem is visible from outside. Hidden issues found during the sweep or inspection get quoted separately from the fix you called about. We’ll tell you exactly what we found and exactly what it costs to fix it before any work begins.
Which Chimney Repairs Cost the Most, and Why?
A full chimney rebuild costs the most, at $6,000 to $9,500 or more, because it involves tearing down masonry above the roofline and rebuilding it to code. Next is liner installation, at $2,800 to $6,500, since a chimney needs a continuous stainless flue from the firebox to the top. Crown and flashing repairs stay on the lower end ($350 to $1,400) because they protect against water intrusion and can often be done without opening the chimney. Costs climb when a problem has been left too long, so the cheapest repair is the one done early.
Masonry Repairs in Fort Collins: Why Timing Matters
Brick and mortar move with the seasons. In Fort Collins, a crack that starts as a hairline split in the crown or a mortar joint can widen through a couple of winters of freeze-thaw cycling. Those cracks let water in, and water inside masonry does two bad things: it rusts any metal in the chimney and it pushes the brick apart when it freezes. Repointing a half-dozen joints is a modest job. Rebuilding a chimney face is not. Get an inspection before the first cold snap and you’ll usually catch the small stuff while it’s still small.
We specify materials by name because what goes inside your chimney matters as much as the labor. We work with six recognized brands: DuraFlex for flexible stainless relining, HeatShield for firebox resurfacing, Gelco for crowns and masonry repair, Olympia Chimney for caps and liners, Famco for caps and dampers, and Copperfield for caps and accessories. These aren’t generic substitutes picked off a shelf; they’re the materials that hold up to Front Range weather. Ask us which one fits your chimney and why.
Firebox resurfacing deserves a note of its own. A cracked firebox can’t just be painted over, and most general contractors don’t carry the specialized HeatShield system or know how to apply it. It’s a resurfacing method that rebuilds the firebox surface rather than patching it. We handle it in-house as part of our chimney repair work, so the same team that finds the cracked firebox fixes it.
How to Save on Chimney Repair
The most reliable way to keep a chimney repair bill low in Fort Collins is to catch problems early with a routine sweep and inspection. A small flashing reseal now avoids a rotting roof deck later. Here’s how to keep costs in check:
- Get the annual sweep and inspection. An inspection surfaces small issues before they become structural. It’s also the cheapest way to document chimney condition for a home sale or insurance question.
- Fix the crown and flashing first. These are the two most common sources of water damage. Water is what turns a cheap repair into an expensive one, so sealing it out early protects the expensive parts of the chimney.
- Choose resurfacing over rebuilding when it fits. HeatShield firebox resurfacing often costs a fraction of a full firebox rebuild, provided the structure is still sound.
- Don’t postpone a liner. A failed liner can’t be safely used, and running a fire with one risks more than a bad repair bill. Reline with a DuraFlex system rated for the job rather than repeating a temporary fix.
- Ask for a written, itemized estimate. A clear scope tells you what’s included and what’s not. Every estimate we give is free, so there’s no cost to get a second look before you commit. Call (833) 740-1407.
One more tip: don’t let anyone quote a repair off a phone description alone. A chimney that looks solid from the ground can hide a cracked flue liner or a crumbling firebox. A proper inspection tells you what the price actually covers.
Repair or Replace? Making the Call
Repair usually wins when the chimney’s structure is sound and the problem is surface-level: a cracked crown, loose flashing, a bad cap, or a firebox that needs resurfacing. Replacement starts to make sense when the masonry itself is failing, when a chimney leans, or when a liner has failed and the flue is too damaged to reline. A written estimate should tell you clearly which one you’re facing and why. If a repair will buy you several more safe seasons, that’s usually the right first move, and we’ll say so.
Why Get a Written Estimate Before Any Repair
Chimney work is hard to see once it’s done, and that’s where vague pricing hurts homeowners. A written estimate locks in the scope, the materials, and the price before anyone climbs on the roof. It means no surprise add-ons after the job starts. It also gives you something concrete to compare if you’re gathering more than one quote. We’ll walk you through exactly what we found, show you the brands and methods we recommend, and lay out what the work costs – before we pick up a tool.
Choosing a Chimney Specialist in Fort Collins
Fort Collins has plenty of general contractors who will take on chimney work as a side job. That’s often how shoddy repairs start. A chimney is a specialized system: the flue, the firebox, the crown, and the flashing all interact, and a fix in one place can affect the others. Our technicians have up to 15 years of experience and work on chimneys only, so the skill set stays sharp. When you need chimney sweep Fort Collins service or a repair, you’re dealing with one specialist from the first call to the final walk-around.
Ask any chimney company you consider a few questions: Will you put the scope and price in writing? Do you inspect as well as repair? Do you specify the materials by name? Can you show that your technicians work on chimneys and not just general home repair? If you’re lining up a repair before the heating season or preparing to list your home, an inspection on its own is a useful starting point, and it’s one we offer as a standalone service.
For safety’s sake: don’t open up a dangerous chimney system yourself. High fireboxes, failed liners, and loose masonry above the roofline are jobs for a trained technician, not a weekend project. A real specialist flags the danger rather than handing you a hammer and a ladder.
FAQs – Chimney Repair Cost in Fort Collins
How much does chimney repair cost in Fort Collins?
Most chimney repairs in Fort Collins run $350 to $1,200, with common fixes like crown repair, flashing resealing, and firebox resurfacing landing in that range. Liner installation and full rebuilds cost more, from $2,800 up to $9,500. Call (833) 740-1407 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney?
Repair is almost always cheaper when the structure is sound, since surface fixes like crown, flashing, or firebox work cost $350 to $1,400 compared with $6,000 to $9,500+ for a full rebuild. The exception is a chimney with failing masonry or a leaning stack, where rebuilding is the safer long-term call. A written estimate will tell you which one you’re facing.
How much does a chimney liner cost in Fort Collins?
A stainless liner installation in Fort Collins typically costs $2,800 to $6,500, depending on the flue height and diameter and the liner system specified. We use DuraFlex flexible stainless systems for relining jobs that need them. Call (833) 740-1407 to get your flue measured and priced.
Can you come out today?
Same-day service is often available, and we’ll confirm the timing when you call. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (833) 740-1407 to check availability and get a free estimate.
How much does firebox repair cost?
Firebox resurfacing with HeatShield typically costs $600 to $1,400 and restores cracked or spalled firebox walls without a full rebuild. It’s a specialized method most general contractors don’t carry. Call (833) 740-1407 for a free, written estimate on your firebox.
Call (833) 740-1407 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fort Collins.
Pricing reflects the Fort Collins market as of 2026. Chimney Sweep Fort Collins offers free estimates – call (833) 740-1407.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Sarah Novak"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Eric Lawson"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Shane Quinn