G

Gelco Chimney Cleaning Service in Fort Collins, CO

Gas fireplace serviceGas fireplace service
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Why Fort Collins Homeowners Choose Gelco Chimney Cleaning

We provide independent Gelco chimney cleaning in Fort Collins, and we treat Gelco equipment as its own kind of system, not as a generic chimney with a brand label. Our technicians have up to 15 years of experience with the failure patterns Gelco gas inserts, wood inserts, and venting actually develop in this climate: sooted pilot assemblies, dried gaskets, cracked refractory panels, and vent caps that give up after a few freeze-thaw cycles. We are an independent service provider. We are not affiliated with, authorized by, or acting on behalf of the Gelco manufacturer, and we don’t claim to be.

professional chimney inspection service in Fort Collins, CO

Call (833) 740-1407

Fort Collins is a wood-burning town. The core of the city is packed with 1950s to 1970s ranches and bungalows carrying original or first-replacement masonry fireplaces, while the 1990s and 2000s subdivisions are full of factory-built fireplaces and inserts. Both groups call us for the same reason: they want a specialist who knows the equipment. Call (833) 740-1407 and we’ll book your sweep.

Why Trust Chimney Sweep Fort Collins for Your Gelco Chimney Cleaning?

We specify materials by name because what goes inside your chimney matters as much as the labor. That’s why we work with professional-grade brands including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. On Gelco equipment, that discipline shows up in how we handle parts. Pilot assemblies, thermocouples, gaskets, and refractory panels are safety-critical, so those get OEM Gelco parts. Decorative caps, flashing, and dampers can often be quality aftermarket pieces where fit and code allow, and we’ll tell you which is which before any work begins.

We’re a full-service chimney specialist, not a generalist with a brush. The company that diagnoses your Gelco insert is the same one that repairs it, so there are no handoffs and no second contractor re-opening the same conversation. Our technicians have up to 15 years of experience across a range of chimney and venting equipment, and every repair we do stays warranty-safe where the manufacturer’s terms allow.

We’re also honest about scope. If your Gelco cap has years left in it, we’ll say so. If a cracked refractory panel on a wood insert needs replacing before the next cold snap, we’ll show you the photo and the line item. You get the finding and the price together.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common Gelco Chimney Cleaning Problems We Fix in Fort Collins

Gelco equipment holds up well, but Fort Collins’s dry, windy winters and dusty spring air push specific components harder than most owners expect. Here are the failure modes we see most often on Gelco units, and why they happen.

  • Sooted pilot assemblies and failing thermocouples on gas inserts. Wind-driven dust settles into standing-pilot and intermittent-ignition models over a season. The pilot gets sluggish, drops out, or won’t hold when the insert warms up. It usually isn’t the gas supply. It’s a sooted assembly or a tired thermocouple, and a proper clean and test tells you which.
  • Degraded direct-vent caps and flashing seals. Freeze-thaw cycles work on the sealant and flashing around a Gelco direct-vent termination, and wind-driven snow finds the gap. Water tracks down the vent, rusts the firebox, and corrodes the draft hood. Water stains on the ceiling or wall near the vent are the first sign, not the last.
  • Cracked refractory panels and shrunken gaskets on wood inserts. Repeated hot-then-cold cycling cracks firebox panels and shrinks door and flue-collar gaskets. The insert starts smoky, draft weakens, and creosote builds faster at the flue collar. Panel and gasket replacement plus a thorough sweep usually resolves it.
  • Seized or bent damper and air-control linkages. Older Gelco wood fireplaces sit unused for months, and the linkage stiffens or bends. A damper stuck partly open bleeds heat up the flue all winter and lets more creosote collect when you do burn.
  • Blocked or restricted venting after heavy seasonal use. Fort Collins’s cold snaps drive concentrated burning in a short window, so creosote and soot pile up quickly. A restricted vent on a Gelco unit makes the insert work harder, and it’s the kind of thing a Level 2 inspection catches before it becomes a draft problem.
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 740-1407

Gelco Parts & Our Repair-vs-Replace Approach

We use OEM Gelco parts for the components that protect you: pilot assemblies, thermocouples, gaskets, and refractory panels. For decorative caps, flashing, and dampers, quality aftermarket parts are acceptable where they fit correctly and meet code, and choosing well there often keeps a repair sensible. We don’t stock or sell Gelco parts, and we’re not a dealer. We install and service with parts that fit your equipment.

Repair is usually the right call on a Gelco unit under about 20 years old with a sound firebox. Heavy corrosion on the firebox or venting often points toward replacement, and we’ll say that plainly when it’s true. A chimney specialist, not a generalist with a brush. Call (833) 740-1407 for a free estimate and a straight answer on repair versus replace.

professional chimney inspection service in Fort Collins, CO

Our Gelco Service Process – Step by Step

  1. 1
    Diagnosis. We pull the insert or access the vent as the job requires, then test the specific components under suspicion: the pilot and thermocouple on a gas model, the refractory panels and gaskets on a wood insert, the cap and flashing seal at the termination. On Gelco direct-vent and B-vent systems, we go to a Level 2 inspection because the venting runs inside the structure where you can’t see it.
  2. 2
    Repair or install. OEM Gelco parts go in for safety-critical components. We reseal or replace a failing vent cap and flashing, replace cracked panels and gaskets, and free up or replace damper linkages. Decorative caps and doors get set to fit the existing chase.
  3. 3
    Test. We run the insert, watch the pilot hold, check draft and flame behavior, and confirm the vent reads as it should. On wood units, we confirm the damper cycles cleanly and the collar gasket seals.
  4. 4
    Warranty-safe handoff. We document what we found and what we replaced, and we leave the unit set up so it stays within the manufacturer’s terms where they come into play.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (833) 740-1407

Gelco Products We Service & Install in Fort Collins

We service the full range of Gelco equipment Fort Collins homeowners have in their homes: Gelco Gas Fireplace Inserts with standing-pilot or intermittent-ignition controls, Gelco Wood-Burning Fireplace Inserts, Gelco Direct-Vent and B-Vent Chimney Systems, and Gelco Decorative Fireplace Doors and Custom Caps. That covers the diagnostic work, the cleaning, and the repair side, along with chimney waterproofing around caps and flashing so water stays out of the chase. Our technicians have up to 15 years of experience, and every job stays inside one specialized trade. If your Gelco unit needs a Level 2 inspection before we touch anything, we’ll say so and do it.

We Also Service These Brands

We’re a multi-brand chimney specialist, so your service doesn’t depend on one product line. Alongside Gelco, we work with DuraFlex for flexible stainless relining and HeatShield for firebox restoration, plus Olympia Chimney, Famco, and Copperfield on other components. That breadth means if your Gelco install shares a flue with another system, we can handle both ends of it.

FAQs – Gelco Chimney Cleaning Service in Fort Collins

Is Chimney Sweep Fort Collins authorized by Gelco? No. We’re an independent service provider, not affiliated with or authorized by the Gelco manufacturer. We service, clean, and install Gelco equipment using parts that fit, and we’re upfront about that when you call.

Do you use quality parts that fit Gelco equipment? Yes. Safety-critical components get OEM Gelco parts, and decorative caps, flashing, and dampers can use quality aftermarket pieces where fit and code allow. We’ll tell you exactly which part goes where before work begins.

How long does Gelco service take? A straightforward sweep on a Gelco wood insert is usually a short visit. A gas insert diagnosis or a Level 2 inspection with venting access takes longer, and a repair that involves pulling the insert adds time. We give you a realistic window when we book, and we don’t leave the estimate open-ended.

What kinds of Gelco products do you cover? Gelco Gas Fireplace Inserts, Wood-Burning Fireplace Inserts, Direct-Vent and B-Vent Chimney Systems, plus Decorative Fireplace Doors and Custom Caps. That covers the diagnostic, sweep, inspection, and repair side of the work.

Will service void my Gelco warranty? Proper cleaning, inspection, and repair by a chimney specialist generally keep you within the manufacturer’s terms, and we work in a warranty-safe way where those terms apply. We document what we find and what we replace so you have a record. If a specific part or procedure touches your coverage, we’ll flag it before we start.

How much does Gelco chimney cleaning cost in Fort Collins? A standard Gelco wood-insert sweep is typically an estimated $180 to $340 depending on access and buildup, gas-insert diagnosis or a Level 2 inspection usually runs in the $250 to $450 range, and repairs are quoted per job with the written estimate setting the final price. Nothing gets recommended without camera evidence you can see for yourself. Call (833) 740-1407 for an exact quote. Estimates are free.

Book Your Gelco Service in Fort Collins, CO

If you own Gelco equipment and want a specialist who knows how it fails and how to fix it, book your sweep or inspection with us. Call (833) 740-1407. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Your free estimate is the next step.

Written by the team at Chimney Sweep Fort Collins.

Need Chimney Cleaning help nationwide? Licensed & insured · free written estimates
Call (833) 740-1407
Local Service Coverage

Request a Free Estimate in Fort Collins

Tell us what you need - Chimney Sweep Fort Collins responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7