Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Evans, CO
We provide independent HeatShield service across Evans – inspection, creosote removal, and repair using HeatShield’s cast-in-place and resurfacing systems. What makes our HeatShield work here different is that we match the product to Evans’ two very different housing tracks: aging clay-tile flues near US-85 and newer prefab fireplaces east toward the river. We’re a chimney specialist, not a generalist with a brush, and we’re not affiliated with or authorized by HeatShield. Call (833) 740-1407 for a free estimate.

Why Evans Residents Choose Us for HeatShield Service
HeatShield is a specialized system most general contractors and even some chimney companies don’t carry or know how to apply. We do. Our technicians have up to 15 years of experience with cast-in-place relining, refractory resurfacing, and crown work, and we specify the material by name because what goes inside your flue matters as much as the labor.
That matters in Evans because the same product question lands differently block by block. The tricky part is knowing which system fits – Armor relining for a failing masonry flue, resurfacing for a cracked firebox – and being honest when neither is the right answer. We’d rather tell you a stainless DuraFlex liner or a partial rebuild is the better call than sell HeatShield work a flue doesn’t need.
Scheduling is straightforward. One call covers the sweep, the inspection, and the repair – no handoffs. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Evans
HeatShield systems are durable, but Evans winters test them. Here’s what we run into most.
- Armor lining delaminating at the top few feet. The cast surface takes the worst of the freeze-thaw swings along the South Platte corridor, and wind-driven moisture works at the exposed section above the roofline. A camera inspection shows where the cast has cracked or pulled away.
- Resurfaced fireboxes with hairline cracks and spalling. This usually traces back to prep: the original clay or refractory substrate wasn’t fully cleaned and keyed before the compound went on. We strip and redo it properly, which means the first application was rushed.
- Insulation backfill settling around the liner. Castable insulation that voids out defeats its own purpose and shows up as hot spots on the chase or drafting problems after cold snaps. We check the fill level during inspection.
- Crown Coat and masonry patch failures at the crown edge. Plains gusts and Arctic fronts flex the cap, and seams open. Once water gets into the flue, freeze-thaw does the rest.
- Creosote glazed hard inside older flues. In Evans’ older wood-burning bungalows, heavy glazed creosote resists a standard sweep. It has to come off before any resurfacing or relining can be trusted.
HeatShield Service in Evans: What Local Conditions Mean for Your Equipment
Evans has two housing tracks, and the HeatShield question differs sharply between them. In the older bungalows near the historic downtown and the US-85 corridor, clay-tile masonry flues have absorbed years of wood burning and often show spalling tile and glazed creosote. The typical path there is a Level 2 inspection followed by an Armor cast-in-place reline sized to the appliance. In the 1990s to 2010s subdivisions pushing east toward the river, prefab metal fireplaces and wood-stove inserts tend to show cracked refractory panels, loose storm collars, and crowns that have flexed under wind. That track is usually a firebox resurfacing and crown repair job. Same city, two very different service calls. Wind-driven downdrafts and cap damage from persistent plains gusts show up in both, and the sharp temperature swings mean creosote builds fast during cold snaps – so we tie cleaning to the fall burn season rather than a generic annual sweep.
HeatShield Models & Products We Service in Evans
We service the full range of HeatShield systems: Armor cast-in-place flue relining, Resurfacing compound for fireboxes and flue walls, Insulation Mix for liner backfill, and Crown Repair and Crown Coat for masonry and crown work. Because HeatShield is a proprietary system, the right components and mixes are the only choice for any reline or resurfacing – aftermarket substitutes undercut the performance the system is designed to deliver. We’re an independent shop, so we recommend HeatShield by flue condition, fuel type, and venting demand, not a dealer quota. When structural damage is past resurfacing, we’ll say so.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Evans
HeatShield work is priced per job by a written estimate. Several things drive the number: flue length and diameter, whether creosote needs removal first, whether the substrate needs repair before resurfacing, and which system you need. The estimate is free and always comes with camera evidence you can see for yourself – nothing gets recommended without it. We’ll tell you exactly what we found and exactly what it costs to fix it before any work begins, and we’ll say plainly when work can safely wait. Call (833) 740-1407 for an exact quote – estimates are free.
Serving Evans, CO – Our Local Coverage Area
We serve Evans and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Evans
Often, yes – but only after a Level 2 inspection confirms the flue is structurally sound enough for cast-in-place work. When it isn’t, we’ll recommend a stainless liner or partial rebuild instead. Call (833) 740-1407 for an exact quote.
The freeze-thaw swings and wind here stress prefab firebox panels and crowns, so cracks and loose storm collars are normal maintenance findings. HeatShield resurfacing handles most of them; severe cases need panel replacement.
It holds up well when applied correctly over a sound crown – but persistent gusts will open poorly bonded seams. Proper prep and a secured cap matter as much as the product.
No. Creosote has to come off first, or the compound won’t bond and the resurfacing will fail early. Cleaning always comes before resurfacing.
A Level 2 inspection – with camera and photo report – is what we recommend before any reline or resurfacing, so you can see the flue condition yourself.
Service Areas Near Evans
We also handle HeatShield work for homeowners near Fort Collins, Timnath, Loveland, Windsor, Wellington, Severance, and the surrounding Weld County communities, including the towns of Milliken and Eaton. If you’re in one of these areas, we can confirm service on your first call.
Book Your HeatShield Service in Evans Today
Call (833) 740-1407 for a free estimate on HeatShield service in Evans. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One call covers the sweep, inspection, and repair – no handoffs, no surprises.
Written by the team at Chimney Sweep Fort Collins.