Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Fort Collins Homeowners Choose HeatShield Chimney Cleaning
We provide independent HeatShield cleaning, inspection and restoration service in Fort Collins. We’re not affiliated with HeatShield and we carry no manufacturer authorization. What we bring is the ability to tell the difference between a firebox that’s a real candidate for resurfacing and one that needs masonry repair or rebuilding first. HeatShield is a resurfacing system, not a liner brand, so the judgment behind it matters as much as the mix itself. Homeowners across Fort Collins get that assessment from people who answer only to them, alongside chimney sweeping, inspection, firebox repair, soot removal and Level 2 inspection. Call (833) 740-1407. We answer 24/7, with fast dispatch from 7am to 7pm.

Why Trust Chimney Sweep Fort Collins for Your HeatShield Chimney Cleaning?
Our technicians have up to 15 years of experience with the kind of masonry fireplaces that make up so much of Fort Collins’s housing. That matters here because HeatShield work lives or dies on the substrate. A firebox that’s oily, sooty or damp when refractory mix goes on will fail, no matter whose name is on the bucket. We clean and inspect before we ever talk about coating.
We also keep the whole job in one place. The same team that sweeps your Fort Collins chimney is the team that inspects the firebox, reads the smoke chamber, and decides whether a HeatShield damper system or firebox resurfacing is worth your money. If you need a Level 2 inspection while we’re there, we can do it. If the flue needs a flexible stainless liner, we handle DuraFlex. No handoffs, no second company following up on our findings.
We specify materials by name because what goes inside your chimney matters as much as the labor. We work with HeatShield, DuraFlex, Gelco, Olympia Chimney, Famco and Copperfield. Every recommendation comes with the reason behind it, and nothing moves forward until you’ve seen what we found. To confirm our licensing and insurance, just ask.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Fix in Fort Collins
These are the HeatShield issues we run into most often in Fort Collins, and why they happen:
- Firebox resurfacing that’s blistering and flaking at the floor. This almost always traces back to application over a dirty or oily substrate. The refractory mix never bonded, so heat cycling lifts it off in sheets. Once it starts failing at the firebox floor, it fails everywhere it lost bond.
- Smoke chamber parging cracked where it bridges corbelled ledges. Deep corbelled masonry moves differently than the thin coating over it. The crack leaves a gap that holds creosote and lets smoke into the room. Smoke chamber resurfacing has to be built to the shape of the ledge, not treated as a flat trowel job.
- Damper frames that bind or chip at the pivot seat. Years of heat cycling around a cast refractory damper frame cause the seat to bind and eventually chip, and the damper stops sealing. That’s when the fire burns poorly and smoke rolls into the room instead of up the flue.
- Crown coatings that open back up over existing cracks. A Crown Coat applied while the underlying crown still holds water will fail. Without a proper bond break, the coating re-cracks along the old crack line. If drainage and crown structure aren’t addressed, the coating is just a finish over a problem.
- Spalling refractory on a firebox resurfaced years ago. An annual sweep often turns up material coming off the firebox floor and back wall on a firebox that was resurfaced long before. It’s the same story: the original application went over soot or a damp surface rather than a clean, scored substrate.
HeatShield Parts & Our Repair-vs-Replace Approach
HeatShield work isn’t a parts swap. It’s a materials-and-craft system, so the honest question isn’t genuine versus aftermarket parts. It’s whether the refractory mix went onto a properly prepped, structurally sound substrate. We choose quality materials and mix them by the book, and we clean and prep more carefully than most because that’s where the failure starts.
Here’s how we make the call. A firebox with sound brick and solid joints deserves resurfacing. A firebox with failed brick, loose corbels or an unsound smoke chamber needs masonry repair first, or rebuilding instead. We tell Fort Collins homeowners plainly when resurfacing is the wrong spend. We’d rather lose the job than coat a firebox that can’t hold it.
Call (833) 740-1407 for a free estimate and we’ll show you what we find before any work begins.
Our HeatShield Service Process – Step by Step
- 1
Diagnosis. We sweep, then inspect the firebox, smoke chamber, damper and crown. If the flue is also in question, we do a Level 2 inspection with camera evidence you can look at yourself.
- 2
Repair or install. We prep the substrate properly: remove soot and oils, score the surface, address loose brick or corbels, and confirm the structure can hold the coating before mixing. Only then is the HeatShield refractory applied.
- 3
Test. We check the damper seat and travel, look for gaps in the smoke chamber parging, and confirm the coating is fully bonded and cured before we call it done.
- 4
Warranty. We document what was done and leave you with a clear record, which keeps the work warranty-safe and covers you for insurance or a future home sale.
See the difference
Before
After
Before
After
Before
AfterHeatShield Products We Service & Install in Fort Collins
We work across the main HeatShield systems. Firebox resurfacing is castable refractory restoration for fireboxes that are structurally sound. Smoke chamber resurfacing is parging over corbelled masonry to close gaps and reduce creosote buildup. The damper repair system uses a cast refractory damper frame for masonry fireplaces that no longer seal. Crown repair and Crown Coat handle refractory resurfacing on the crown to keep water moving away from the masonry. Whichever you need, the decision starts with a proper sweep and inspection, because a coating applied to the wrong substrate fails. Call (833) 740-1407 to book that first step.
We Also Service These Brands
We’re not tied to one product. Alongside HeatShield firebox and smoke chamber work, we install DuraFlex flexible stainless liners when a flue needs relining, and we work with Gelco and other professional-grade materials. That range means we recommend the system that fits your Fort Collins chimney, not the one we happen to sell.
FAQs – HeatShield Chimney Cleaning Service in Fort Collins
Is HeatShield Firebox Resurfacing the same as a chimney liner? No. A liner goes inside the flue to protect it, while firebox resurfacing restores the masonry firebox itself. They fix different parts of the chimney. A firebox can need resurfacing while the flue needs a separate DuraFlex liner, and we’ll tell you which applies. Call (833) 740-1407 with questions on your Fort Collins chimney.
How do I know if my resurfaced firebox is failing? You’ll see refractory material flaking or spalling at the firebox floor and back wall, and often a chalky dust after a fire. It usually means the original mix went over a dirty or damp surface. A sweep and inspection confirms it. Call (833) 740-1407 for a free estimate.
Does a HeatShield damper repair fix a damper that won’t seal? It can, when the problem is a worn or chipped cast refractory seat. A damper frame that binds or chips at the pivot is exactly what the repair system is built for. If the frame itself is cracked through, we’ll say so. Call (833) 740-1407 to have yours checked.
Can HeatShield crown coating be applied over my existing cracked crown? Not safely if the underlying crown still holds water or lacks a proper bond break. Coating over that just re-cracks along the old line. We inspect drainage and structure first, then decide. Call (833) 740-1407 for an honest look.
Why would a sweep recommend soot removal before resurfacing my smoke chamber? Because refractory parging won’t bond to soot. Oils and creosote on the corbelled masonry cause the coating to fail at the gap. Cleaning first is the only way the resurfacing lasts. Call (833) 740-1407 to book the sweep and inspection.
How much does HeatShield chimney cleaning cost in Fort Collins? Pricing is set per job by a free written estimate, because firebox and smoke chamber work varies with the condition we find. We’ll give you the exact scope and cost before any work begins. Call (833) 740-1407. We answer 24/7, with fast dispatch from 7am to 7pm.
Book Your HeatShield Service in Fort Collins, CO
If your firebox, smoke chamber, damper or crown needs a proper HeatShield assessment, we’ll sweep, inspect and show you what we found before recommending anything. Call (833) 740-1407 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Written by the team at Chimney Sweep Fort Collins.