Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Severance, CO
We provide independent HeatShield service across Severance, and we do it without any manufacturer affiliation. The thing that makes our HeatShield work here different is the housing: most of this town went up fast and new, so we spend more time on uncured factory mortar joints and freeze-thaw glaze failures than on old fireplaces. A chimney specialist, not a generalist with a brush. Call (833) 740-1407. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Severance Residents Choose Us for HeatShield Service
We work with HeatShield products regularly, so we know how the HeatShield ceramic glaze bonds to clay flue tile and where that bond gives out under high-plains conditions. That isn’t book learning. It’s the pattern you see after enough inspections on the northern Front Range.
Severance gives us a specific version of the problem. Homes here are newer than the flues inside them deserve. Builders put in factory mortar joints that get fired before they’ve fully cured, and the first few heating seasons finish the damage. When we scope a job in Severance, we look at that joint line before we look at anything else.
What you get from us is one call for the sweep, the Level 2 inspection, and the repair. The company that finds the problem is the same one that fixes it. We’ll tell you exactly what we found and exactly what it costs to fix it, before any work begins. Scheduling a Severance visit with us is straightforward: you describe the fireplace or stove, we book a window, and the estimate is free.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Severance
These are the HeatShield failures that show up most often on Severance flues, and each one has a local cause behind it.
- Cerfractory glaze delamination. The ceramic glaze can lift and flake off flue tiles when the liner cycles hard between hot and cold. Severance’s Chinook winds drive downdrafts that do exactly that, cooling a warm flue fast in the middle of a burn.
- Cracked or spalled clay tiles at the mortar joints. Repeated heating and cooling opens the joints, and the tile face breaks away around them. A Level 2 inspection usually finds this; a flashlight from the firebox door doesn’t. On newer Severance homes the joint is often the weak point from the start.
- Glaze erosion hidden under heavy creosote. Freestanding wood stoves used as supplemental heat build creosote fast, and that layer masks the tile damage underneath. On prefab and stainless-lined chimneys, the glaze can wear away before anyone sees it.
- Improper adhesion over soot or moisture-damaged surfaces. A coating applied without proper cleaning won’t bond, and it fails within a season or two. We don’t apply HeatShield over a dirty or damp flue, whatever the shortcut saves.
- Clogged caps and blocked transitions. This is the rural part of the job. Caps on Severance homes fill with debris blown in from surrounding farm fields, and a top-seal failure around the crown lets water into the same joint you’re trying to save.
HeatShield Service in Severance: What Local Conditions Mean for Your Equipment
Severance grew quickly, and a lot of the clay tile flues inside those newer homes have never been swept. That single fact changes how HeatShield work goes here. On an older chimney you’re usually repairing wear. On a first-generation Severance flue you’re often judging whether the factory mortar joints were ever properly cured, because the HeatShield system depends on a sound, dry substrate to bond to. When those joints are still soft or damp, the glaze fails early, and no coating can rescue a liner that was never given a fair start.
Add the high-plains weather and the picture sharpens. Cold winters, ground blizzards, and Chinook winds push rapid freeze-thaw cycles through the tile and pull downdrafts down the flue. A typical job in a Severance home with a factory-built fireplace goes like this: heavy seasonal use plus those downdrafts pack creosote into the flue and stress the clay joints, the inspection turns up cracking or spalling that has compromised the glaze, and the fix is careful cleaning, joint repair, and a fresh application of the HeatShield system. That sequence is the norm here, not the exception.
HeatShield Models & Products We Service in Severance
We work with the HeatShield products that matter for Severance liners. The Cerfractory Flue Sealant handles the ceramic glaze on clay tile. The Resurfacing System addresses spalled or cracked tile where the structure is still sound. Joint Repair Compound rebuilds the mortar joints that open up between tiles. Heat-Resistant Sealant closes the crown and flashing transitions where water gets in.
We specify materials by name because what goes inside your chimney matters as much as the labor. We use genuine HeatShield ceramic glaze and repair compounds so the bonding and heat resistance behave the way they should, and quality aftermarket caps and sealants where the issue isn’t structural. Repair usually wins when the liner’s structure is intact. If the tile is too far gone, we’ll say so and walk you through relining instead.

See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Severance
Every HeatShield job in Severance is priced per job by a written estimate, and the estimate is free. What drives the number: whether you need a sweep first, how far the creosote has built up, how many joints need rebuilding, and whether the flue is a single story or climbs through two. A simple glaze reapplication over sound tile costs far less than a job that needs full joint reconstruction before the HeatShield system can go on. We set the estimate in writing before any work begins, so you’re comparing a real figure to other bids rather than a guess.
If you’d like an exact quote for your Severance chimney, call (833) 740-1407 and we’ll book the inspection.
Serving Severance, CO – Our Local Coverage Area
We serve Severance and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Severance
The HeatShield system bonds a ceramic glaze to the inside face of the clay tile, sealing cracks and spalling so the flue is smooth and gas-tight again. On Severance’s newer flues it works well when the tile is structurally sound and the joints are dry and properly cured first. Call (833) 740-1407 to book an inspection.
Early failure almost always traces back to the surface, not the product. Coating over soot, over damp tile, or over factory mortar joints that were never cured properly keeps the glaze from bonding, and Severance’s freeze-thaw cycles finish it off. Call (833) 740-1407 for an exact quote – estimates are free.
You’ll want a Level 2 inspection when the flue has had a change, a chimney fire, or a tile problem nobody has verified yet, and that’s the usual case on a Severance home that’s never been swept. A Level 1 read is enough for routine annual checks on a flue we’ve already documented.
No. HeatShield is a flue resurfacing product, so it works on the inside of the liner, not the brick on the outside of the chimney. Exterior spalling is a masonry repair, and we’ll tell you plainly which problem you actually have.
Once a year is the working rule for a wood stove used as supplemental heat, and Severance’s long, windy winters make that a firm number rather than a loose one. Heavy creosote from seasonal use is what hides the tile damage. Call (833) 740-1407 and we’ll get you on the schedule.
Service Areas Near Severance
We serve homeowners throughout Severance and the towns around it. That includes Fort Collins to the west, Windsor to the south, Timnath just down the road, plus Loveland and Wellington. If you’re in or near Severance, we can scope your HeatShield work.
Book Your HeatShield Service in Severance Today
Ready to know what’s actually inside your flue before the next burning season? Call (833) 740-1407 for a free estimate. Our technicians have up to 15 years of experience with HeatShield systems and the flues they go into. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fort Collins.