Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Fort Collins Homeowners
Most chimney problems in Fort Collins stay invisible until they cause a real one: a slow draft you blame on the wood, a stain on the ceiling that shows up after the first snowmelt, or a liner that cracked quietly over a couple of winters. You can’t see inside your own flue. That’s the whole reason an inspection exists. Our technicians have up to 15 years of experience and inspect with a camera, not a flashlight and a guess. We tell you exactly what we found, show you the footage, and give you a flat written price before any work begins.
We’re a full-service chimney specialist, so the company that inspects your chimney is the same one that sweeps it or repairs what we find. One call covers it. Call (833) 740-1407 and we’ll set up a real appointment. A chimney on the edge of the season is worth booking before the first cold snap fills the calendar.
Fireplace Inspection
Fireplace Inspection covers the firebox, damper, smoke chamber and the first stretch of flue attached to the fireplace you actually use. When you need it: before your first fire of the season, after a chimney fire, or before you list or buy a home in Fort Collins. We scope the firebox for cracked refractory mortar, check the damper seal and the smoke shelf, and camera the flue above it. If the firebox is spalled or the mortar joints are failing, we resurface with HeatShield rather than smearing on a patch that cracks again next winter. Fireplace inspections typically run $99 to $250 depending on access and whether a camera is used; a firebox resurfaced with HeatShield is quoted separately once we know the extent. The written estimate sets the final price.
What We Check in the Firebox
The firebox takes the most direct heat in the whole system, so we look hard at the mortar joints, the firebrick faces and the damper plate. Cracks wider than a hairline or brick that crumbles to the touch mean the box needs real restoration, not a thin patch. We photograph what we find so you can see it too.
Gas Insert and Damper Checks
Gas inserts and wood fireplaces fail differently. Gas units get checked for a clear vent path and proper damper position; wood boxes get checked for a damper that seats and an open smoke path. A damper that won’t hold open or seal shut is a small fix that saves a lot of smoke in the room.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services are what you book when you want a documented answer to a simple question: is this chimney safe to use? We offer this as a standalone service, which is why home buyers, sellers and insurance paperwork benefit from it more than a general sweep. The technician follows a full checklist: exterior masonry, crown, cap, flashing, flue interior, firebox, damper and venting. We send a written report with photos and, where relevant, camera footage. A standard inspection in Fort Collins typically runs $99 to $250; a camera-assisted inspection with documentation is commonly $150 to $350. Everything beyond that is quoted per job from the written estimate. We can work with your insurer if you need documentation for a claim.
Standalone Reports for Buyers and Sellers
Real estate timelines don’t leave room for vague answers. A standalone inspection gives you a dated report you can hand to your agent, your lender or your buyer without anyone needing a second opinion. We tell you plainly which items are urgent, which can wait a season, and which are cosmetic.

Pre-Season and Annual Checks
The quiet stretch before fall is the best time to find a problem, because nobody’s cold yet. An annual check catches cracked mortar, a loose cap and a bird nest before they turn into a smoky first fire. If nothing needs doing, we’ll say so and tell you when to check again.

Chimney Flue Inspection
Chimney Flue Inspection focuses on the inside surface of the flue: the liner, the joints, and the clearance from combustible framing. You need it if you’ve had a chimney fire, if you’re converting a fireplace to a new appliance, or if your chimney was built before modern lining standards. In Fort Collins homes, that last one comes up often, because masonry chimneys from earlier decades were built with clay tile that cracks under thermal cycling from cold winters. We camera the full run, look at every joint, and check that creosote has not built up to a dangerous glaze. A flue inspection alone is usually $99 to $250, and a camera-assisted full run commonly runs $150 to $350. Relining with DuraFlex, if it’s needed, is quoted from the estimate.
Clay Tile and Liner Condition
Clay tile is strong but brittle, and a single winter of freeze-thaw can open a joint that was tight in October. We look at tile alignment, gaps at the joints and signs the flue was ever relined. A missing or displaced tile is a real drafting and safety problem, not a cosmetic one.
Clearance to Combustibles
Even a sound flue has to sit the right distance from the wood framing around it. We check what’s visible and flag where we can’t verify clearance so you know the limit of the inspection. If you need a definitive answer, that’s what a Level 2 inspection is for.
Chimney Fire
Chimney Fire damage is not always obvious from the room, which is exactly why a professional inspection after one matters. A chimney fire can crack tile, warp a damper, distort a liner and leave a glazed creosote layer behind, even when the flames never showed above the roof. If you’ve had one – or suspect one – book an inspection before you light another fire. We camera the flue, check the firebox and damper, and test whether the liner still holds together. A post-fire inspection typically runs $150 to $350, and any liner or firebox work is quoted from the written estimate. Please don’t light a fire in a chimney that hasn’t been checked after a fire event.
Glazed Creosote and What It Means
Stage 3 creosote is a hard, shiny, tar-like layer that ordinary brushing won’t remove. It’s the fuel a chimney fire feeds on, and it needs a chemical treatment or mechanical removal by a specialist. If we find it, we’ll explain the options and the cost before we start.
After-the-Fire Repairs
Common repairs after a chimney fire include relining with a flexible stainless system, replacing a warped damper, and restoring a damaged firebox with HeatShield. We keep the diagnosis and the repair under one company, so nothing gets lost between a report and a contractor.
Level 2 Chimney Inspection
Level 2 Chimney Inspection goes past what the eye can see from the hearth or the ground: it includes the accessible attic, crawlspace and roof-level components as well as a full camera run of the flue. You need one when a property changes hands, after a chimney fire or earthquake, when you change the appliance or fuel type, or when the chimney has an unresolved problem. In Fort Collins, we recommend it for any home where the chimney’s history is unknown. A Level 2 inspection commonly runs $150 to $350 depending on access to the attic and roof; documented reports for a real estate transaction may run a little higher. The written estimate sets the final price. Details beyond that come only from what we find on-site.
What’s Included in Level 2
Level 2 adds accessible attic and crawlspace inspection, roof-level checks of the crown and cap, and a full video scan of the flue. It’s the inspection most real estate contracts and insurers recognize. We document each area with photos so the report stands on its own.
When Level 2 Is the Right Call
Buying or selling, changing appliance type, after a fire or a storm event – those are the standard triggers. If you’re unsure whether your situation needs Level 1 or Level 2, tell us the circumstance and we’ll book the right one. There’s no benefit to selling you a bigger inspection than you need.
Chimney Leak
A Chimney Leak is water getting in where it shouldn’t, and it almost never comes through the flue itself. It comes through a cracked crown, failed flashing at the roof line or a missing or rusted cap. In Fort Collins, the freeze-thaw cycles can open hairline cracks in the masonry that let meltwater in, then refreeze and widen the gap. If you’ve noticed a water stain on the ceiling near the chimney, discolored mortar, or rust inside the firebox, book an inspection. A leak diagnosis with camera and exterior check is commonly $150 to $350, and repairs like crown work, flashing and caps are quoted from the written estimate. We won’t sell a liner replacement for a leak that turns out to be a crown.
Finding the Source
Masonry water damage comes from above and to the side, so we check the crown, the cap and the flashing before we go anywhere near the flue. Water stains inside the firebox often point to a cap problem, not a liner. Once we know where it’s entering, the fix is specific rather than a guess.
Preventing Repeat Leaks
Repairing the flashing and resealing the crown is the routine answer. A quality cap keeps rain and birds out and pays for itself in avoided moisture repair. If the masonry already holds water, we’ll tell you how to dry it out properly before sealing.
Chimney Camera Inspection
Chimney Camera Inspection is a video scan of the full flue using a camera on a flexible rod, and it’s what turns a vague “looks fine” into an actual answer. You need it for a house sale, an insurance claim, a suspected fire, an unresolved draft, or any time a technician says “I can’t see the liner from here.” We record the run and share the footage with you. Camera inspections in Fort Collins typically run $150 to $350, and getting the footage is part of the price, not an add-on. If you’re the kind of homeowner who wants to see what you’re paying for, this is the inspection to book. The written estimate covers any repair that follows.
What the Camera Reveals
The feed shows missing mortar joints, cracked tiles, collapsed liner sections, gaps at offsets and the glazed creosote a brush alone won’t touch. It also shows the actual shape of the flue, which matters when we’re quoting a reline. You see it the same time we do.
Footage You Keep
We hand over the recording so you can share it with a buyer, a contractor or an insurer without needing another visit. Having the footage on file also makes future work easier to compare against. If a second opinion wants to undercut us, they can look at the same evidence.
Brands We Service
We specify materials by name because what goes inside your chimney matters as much as the labor. When we reline, we work with DuraFlex flexible stainless systems, which fit the offset and irregular flues common in older Fort Collins homes. For firebox restoration we use HeatShield, a resurfacing system that most general contractors don’t carry or know how to apply. We also work with Gelco, Olympia Chimney and Famco for the caps, dampers and components that finish the job properly, and with Copperfield for the masonry side of a repair.
We service DuraFlex liner systems and know where joints and seals tend to wear, and we service HeatShield-restored fireboxes and know how the surface should look when it’s applied right. We also handle repairs on standard clay tile and work with Gelco, Olympia Chimney and Famco components, so whether you have a branded system or any other make, we can help. Ask us what we’ll use on your chimney and we’ll tell you before we start, not after.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Rust in the firebox or damper. Rust means water is getting in somewhere above, usually a cracked crown or failed flashing. It won’t fix itself, and the longer moisture sits in the masonry, the more of it you’ll repair later.
- A strong, smoky smell that won’t clear. Creosote buildup, a blocked flue or a broken damper can push smoke back into the room instead of up the chimney. That draft problem is worth diagnosing before your next fire.
- Cracked or crumbling mortar in the firebox. Widening joints and loose brick can let heat reach the surrounding structure. This is one to look at before you burn again.
- A water stain on the ceiling or wall near the chimney. Stains point to a leak you can trace to a crown, cap or flashing issue. Catching it early usually means a modest repair rather than masonry work.
- A fire you know or suspect was a chimney fire. Listen for a roar, watch for a shower of sparks from the top, then book an inspection before the next fire. The flue may look fine from outside and be damaged inside.
Our Process, Step by Step
- 1
You call, we book. Call (833) 740-1407. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We set a time that works and confirm what the visit will cover so there’s no surprise on the day.
- 2
We inspect from the top down and the bottom up. We check the exterior crown, cap and flashing, then move inside to the firebox and damper before running the camera. A technician with up to 15 years of experience reads the whole system, not one piece of it.
- 3
We record the flue with a camera. The scan runs the full length of the flue and shows cracks, joint gaps, offsets and glazed creosote. You see the footage as part of the report, so what we say is something you can verify.
- 4
We hand you a written report and a flat price. The report names what’s urgent, what can wait, and what we recommend – no vague “may need attention” lines. If nothing needs doing, we tell you that plainly and don’t invent a repair.
- 5
We do the work and check it. If repair is needed, the same specialist company that found the problem fixes it – relining with DuraFlex or firebox resurfacing with HeatShield. We inspect the finished work before we leave.
How Much Does Chimney Inspection Cost in Fort Collins?
Chimney inspection in Fort Collins typically runs $99 to $250 for a standard visual inspection, and $150 to $350 for a camera-assisted or Level 2 inspection with documentation. A typical post-fire inspection with a camera run lands in that same $150 to $350 range. A firebox resurfaced with HeatShield, a DuraFlex reline, or masonry repair is quoted per job once we’ve seen the chimney, and the written estimate sets the final price.
What affects the price: how much of the system you want covered, whether the flue needs a camera scan, roof or attic access, and whether there’s a documented report to produce for a sale or an insurer. A simple visual check on an accessible chimney costs less than a full Level 2 on a tall masonry stack with an offset. None of those factors should feel like a surprise, and with us they don’t, because we quote before we start.
How to avoid overpaying: ask for a written itemized quote, ask whether camera footage is included, and ask which findings are urgent and which can safely wait a season. Any estimate that pushes a liner or a full rebuild without showing you the evidence deserves a second look. Our estimates are free, and the camera footage and photo report come with the inspection so you’re not paying to be told what you can’t see.
Our Service Area Near Fort Collins
We book inspections around Fort Collins and the neighboring towns: Timnath, Loveland, Windsor, Wellington, Severance, Johnstown, Eaton, Berthoud, Milliken, Evans and Mead. If you’re just outside that ring, call and we’ll confirm whether we cover your address before we book. Fort Collins sits at the edge of the foothills, where cold winters and freeze-thaw cycles are hard on masonry and flashing, so timing your inspection before the first freeze matters. For scheduling across the region, see our Fort Collins service page and the nearby Timnath and Loveland pages.
Serving Fort Collins, CO – Our Local Coverage Area
We serve Fort Collins and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Fort Collins
A chimney inspection is a visual and, where needed, camera-based check of the full chimney system: exterior masonry, crown, cap, flashing, flue, firebox and damper. It answers whether the chimney is safe to use and documents any defects with photos and footage. We offer it as a standalone service, which suits home buyers, sellers and insurance paperwork. Call (833) 740-1407 for an exact quote – estimates are free.
A standard inspection usually takes 45 minutes to an hour, while a Level 2 with a full camera run and attic or roof access can take closer to two hours. Access to the flue and the roof line is the biggest factor. We’ll tell you roughly what to expect when you book. Call (833) 740-1407 to schedule – estimates are free.
A chimney inspection in Fort Collins typically runs $99 to $250 for a visual check and $150 to $350 for a camera-assisted or Level 2 inspection with documentation. Firebox resurfacing or relining is quoted separately per job from the written estimate. The estimate is free and sets the final price. Call (833) 740-1407 for an exact quote – estimates are free.
Yes. We apply HeatShield for firebox restoration and install and repair DuraFlex flexible stainless liner systems. Those are specialized products most general contractors can’t supply or apply correctly, and we handle them as part of our full-service chimney work. We can also repair standard clay tile. Call (833) 740-1407 to discuss your system – estimates are free.
Same-day appointments are often possible, depending on the schedule. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 740-1407 to check availability – estimates are free.
Our workmanship is backed in writing, and the exact terms come with your estimate so you know what’s covered before any work begins. We follow up on anything that isn’t right under those terms. If you have a question about coverage for a specific repair, ask us directly and we’ll explain it. Call (833) 740-1407 – estimates are free.
Clear the firebox of ash and unburned wood, and make sure we can get to the hearth and to the attic or roof access if your inspection includes them. Move anything fragile away from the work area and let us know about any gas insert or prior chimney fire. That’s all we need. Call (833) 740-1407 to book – estimates are free.
Schedule Your Chimney Inspection Service in Fort Collins Today
One call covers the inspection, the sweep and any repair, because the company that finds the problem is the same one that fixes it. You’ll get a written report, camera footage and a flat price before work begins. Call (833) 740-1407. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Your no-obligation estimate is free, and we’ll tell you plainly when a repair can wait.
For the full range of work we do, see chimney sweep and chimney sweep Fort Collins, and when something needs fixing, our chimney repair service follows the same inspection report.
Written by the team at Chimney Sweep Fort Collins.