Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Windsor, CO
Chimney inspection in Windsor is the service that matters most here, because most of this town’s fireplaces are gas, not wood. Windsor grew fast through the 1990s and 2010s, and the houses that went up in that run were built with factory-built gas fireplaces and wood-burning inserts rather than traditional masonry hearths. Those flues still need eyes on them. Gas and insert flues collect debris, lose their caps to wind, and pick up animal nests in ways that look nothing like a creosote problem. Our technicians have up to 15 years of experience, and we bring that read to every Windsor home. Call (833) 740-1407.
Why Windsor Homes Are Different
Windsor sits in the windy northern Colorado Front Range corridor, and that single fact changes the work. Winter downslope winds and the occasional heavy wet snow push hard on chimney caps, crowns, and flashing. On the newer subdivision housing, a loosened or flipped cap is one of the most common things we find. Older masonry chimneys near downtown Windsor face a different pressure: hard freeze-thaw cycles that work water into brick and mortar and accelerate spalling over time.
The housing stock splits roughly in two. The 1990s-2010s tract and semi-custom homes across neighborhoods like Water Valley and Belmont Ridge came with factory-built gas fireplaces or wood-burning inserts installed at construction. A smaller set of older single-story homes, especially around the 80550 side of town, still runs on full masonry chimneys. That means two very different inspections in the same town. A gas or insert flue often needs debris and animal-guard inspection, cap assessment, and gasket checks rather than a classic creosote sweep. A masonry chimney needs the full treatment: flue scanning for glazed creosote, crown and flashing review, and firebox condition. Both get handled the same way, with findings you can see and a written price before anything starts.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Windsor Services
Two services bring Windsor homeowners to the phone most often: the routine sweep before the first fire of the season, and repair once the inspection turns up real damage.
Chimney Sweep in Windsor
A sweep in Windsor depends entirely on what’s in the flue. On a gas unit, that usually means clearing animal debris and nests, checking the cap and the vent termination, and confirming the damper and gaskets are sound. On a wood-burning insert or a masonry fireplace, it means brushing the flue and pulling out soot and creosote down to the firebox. Heavy winter wet snows that pile up around a cap and then melt can drive moisture past a worn seal, which is one reason we look at the whole assembly rather than just the flue. For the full breakdown of what a visit covers, read our chimney sweep page for Windsor.

Chimney Repair in Windsor
Repair in Windsor is often about the wind. Loose caps, cracks in the crown, and flashing that has pulled away from the roofline are what the downslope gusts tend to leave behind. On older masonry, freeze-thaw has usually had a few decades to open up mortar joints, so repointing and crown work come up. On a damaged firebox, we resurface with the HeatShield system instead of patching over cracks. Stainless relining is handled in-house with DuraFlex where a flexible system is the right fit. See what each repair involves on our chimney repair page for Windsor.

Chimney Inspection in Windsor
Chimney inspection in Windsor is less about creosote and more about structure and airflow. The town’s newer subdivisions filled in with factory-built gas fireplaces and inserts, which means a lot of local flues need cap, animal-guard, and termination checks rather than a heavy sweep. Wind is the other half of the job: downslope gusts off the Front Range loosen and flip caps on these homes, and hard freeze-thaw works on the older masonry near downtown. A proper inspection reads both possibilities. We perform chimney inspection as a standalone service, so home buyers, sellers, and homeowners gathering insurance documentation can get a clear report without booking repair work they may not need yet.
Fireplace Inspection
Signs you need it
You smell a draft or cold air coming down the flue on windy Windsor days, the firebox shows cracked or crumbling refractory panels, or the fireplace has sat unused since you moved in and nobody has looked inside it.
What it costs in Windsor
A fireplace inspection typically runs $99-$179 in Windsor, and a Level 2 inspection with camera typically runs $189-$349.
How we do it
We open the firebox and damper, check the refractory panels, gaskets, and firebox-to-flue connection, run a camera up the flue where needed, and photograph everything we find for your report.
Level 2 Chimney Inspection
Signs you need it
You’re buying or selling a Windsor home, you’ve changed fuel type or appliance, a chimney fire or earthquake has hit the house, or the last inspection was more than a season ago under heavy use.
What it costs in Windsor
A Level 2 inspection with camera typically costs $189-$349 in Windsor, with the written report and photos included in that figure.
How we do it
We scan the full flue with a camera, inspect accessible portions of the exterior, attic, and crawl space where reachable, check cap, crown, and flashing, and document the condition of every component in a photo report you keep.
What Chimney Inspection Costs in Windsor
These ranges reflect typical Windsor jobs; the written estimate you receive sets the final price.
| Item | Typical range in Windsor |
|---|---|
| Level 1 inspection (visual, accessible components) | $99-$179 |
| Level 2 inspection with camera and photo report | $189-$349 |
| Standalone inspection for a real estate transaction | $189-$349 |
Do I really need an inspection if my fireplace is gas?
Yes, especially in Windsor. Gas fireplaces in newer subdivision homes can lose their cap to wind or collect animal nests in the termination, and neither shows up as a creosote problem. An inspection confirms the flue is clear and the venting is intact. Call (833) 740-1407 for an exact quote; estimates are free.
How often should a Windsor chimney be inspected?
Once a year is the standard, and it holds whether you burn wood or run gas. Windsor’s wind corridor is the reason we don’t stretch it: a cap that flipped in a winter gust is invisible from the ground. Annual inspection catches it before it becomes a repair. Call (833) 740-1407 to book.
Brands We Service in Windsor
We specify materials by name because what goes inside your chimney matters as much as the labor. That means Gelco and Olympia Chimney components, Famco caps, and Copperfield products where the job calls for them. We don’t claim to stock parts locally; we order what the repair needs and confirm turnaround in your estimate. You can see the full lineup on our brands page, and if a brand you’ve heard of isn’t listed, ask us directly before you book.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Windsor, CO
Every figure below is a typical range, never a final quote. The written estimate you receive before work begins is the price.
| Service | Typical range in Windsor |
|---|---|
| Level 1 chimney inspection | $99-$179 |
| Level 2 chimney inspection with camera and photo report | $189-$349 |
| Standalone real estate inspection | $189-$349 |
| Standard chimney sweep (wood-burning) | $149-$279 |
| Gas fireplace flue cleaning and debris check | $119-$199 |
| Chimney cap replacement | $229-$449 |
| Crown repair | $329-$749 |
| Flue relining with DuraFlex | $1,899-$4,299 |
| Firebox resurfacing with HeatShield | $799-$1,849 |
| Tuckpointing and masonry repair | $429-$1,199 |
In Windsor, price tends to climb when a downslope gust has done real damage to a crown or flashing, or when freeze-thaw has opened up enough mortar that repointing becomes the honest call rather than a patch. Roof access and chimney height on the two-story homes in the newer subdivisions also affect labor. Every job is quoted flat and agreed before we book, and you’ll see the camera evidence behind any repair recommendation before you decide.
Neighborhoods We Serve in Windsor
We cover the full town, from the newer subdivisions to the older streets near the center of Windsor. Homes out toward Severance and Timnath are typical bookings, along with the older masonry stock downtown. Response across Windsor is scheduled around the whole town rather than a per-subdivision promise; when you call we confirm your opening.
- Water Valley
- Belmont Ridge
- Downtown Windsor (80550)
- The Ridge at Harmony Road
- Highland Meadows
Service Area – Cities Near Windsor
We work across northern Colorado, and Windsor sits at the center of a tight cluster of towns. Homeowners in Severance, CO are a short drive east, and the newer homes over in Timnath, CO share the same wind exposure. To the south, Johnstown, CO runs mostly gas and insert flues like Windsor’s. East and up the plains, Eaton, CO holds more older masonry chimneys, so the inspection work leans toward creosote and mortar. Call and we’ll confirm your address is inside the area before we book.
Serving Windsor, CO – Our Local Coverage Area
We serve Windsor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Windsor
Yes. We schedule across the whole town, from the subdivisions out by Water Valley and Belmont Ridge to the older homes near downtown. When you call we confirm your address and the next opening that works. Call (833) 740-1407.
Permits vary by the work. A simple sweep or inspection usually doesn’t require one, while structural changes like relining or significant masonry repair may. The safest step is to ask your city’s building department directly. We can tell you what the job involves and whether the extent of the work typically triggers a permit review.
We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. Windsor sits close to our core area, so most bookings land within a short window. A call outside dispatch hours is booked into the next opening.
If anything in your Windsor home’s flue is uncertain, call us at (833) 740-1407 for a free estimate on chimney inspection, sweeping, or repair. We’ll tell you exactly what we found and exactly what it costs to fix it, before any work begins.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Windsor Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Sarah Novak"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Eric Lawson"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Shane Quinn