Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Windsor, CO
We provide independent DuraFlex service across Windsor, from the gas-fireplace subdivisions on the east side to the older masonry homes near downtown. The one thing that sets our DuraFlex work here apart: many of the calls we get in Windsor start at the top of the chimney, not inside the firebox. Windsor’s downslope winds work on DuraFlex termination caps and top plates through the winter, and a loosened cap lets water and debris into a flue that may not have seen a fire all season. One call covers the sweep, the inspection, and the repair. Call (833) 740-1407 to book a free estimate.

Why Windsor Residents Choose Us for DuraFlex Service
We’re a chimney specialist, not a generalist with a brush. Every job stays inside one trade: sweep, inspection, repair. That focus is why we know DuraFlex flexible stainless liners closely enough to tell you whether your cap, storm collar, or liner support is the actual problem, rather than sweeping and moving on.
We work with professional-grade brands including DuraFlex and specify materials by name, because what goes inside your chimney matters as much as the labor. We’re an independent DuraFlex service provider, not manufacturer-affiliated or authorized, so our recommendations come from what your liner needs, not from a sales quota.
Our technicians have up to 15 years of experience, and we book Windsor calls on a schedule that fits your address and the season. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. One company finds the problem and fixes it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Windsor
DuraFlex systems fail in predictable ways, and Windsor conditions push several of them harder than most Front Range towns.
- Wind-loosened termination caps and top plates. Windsor’s downslope wind corridor rattles the cap and top plate on two-story subdivision homes until the fasteners work loose. Once the cap lifts, rain and snowmelt run straight into the flue and begin rusting the stainless liner from the top down.
- Debris in gas fireplace liners instead of creosote. Insulated DuraFlex liners serving a gas fireplace collect leaf litter, animal nests, and blowing debris rather than creosote. A standard sweep that only chases soot misses a blocked air intake, which is often the real reason a gas insert won’t light or won’t stay lit.
- Freeze-thaw damage at the storm collar. Hard freeze-thaw cycles crack the sealant at the storm collar and top plate. Each crack becomes a leak path, and the corrosion moves from the outside of the flex liner inward, where a visual inspection from the firebox won’t see it.
- Sagging flex runs. Improperly supported DuraFlex flex runs settle after years of thermal cycling, creating offsets that trap soot and cut draft. A sag in a flex liner is easy to miss from below and obvious on camera.
- Caps flipped or missing after a wind event. When a cap comes off entirely, the flue is open to birds, squirrels, and whatever the wind carries. Animal guards and debris inspection matter as much as the sweep on these calls.
DuraFlex Service in Windsor: What Local Conditions Mean for Your Equipment
Windsor’s position in the Front Range downslope wind corridor changes the order of a service call. In most towns, a cleaning starts with the flue and works up. Here, we start at the roof line. The same winds that make winter downslope gusts a regular feature also flip and loosen termination caps on newer subdivision homes, so a large share of DuraFlex calls in Windsor turn out to be a cap or top-plate problem before they’re ever a dirty flue.
Water Valley and Belmont Ridge show you the housing pattern plainly: homes built in the 1990s through 2010s, many with a factory-built gas fireplace or a wood-burning insert installed at construction. The liner in these homes needs inspection on gas-appliance terms, not wood-burning terms. Meanwhile, the smaller stock of older single-story masonry homes near downtown, ZIP 80550, faces a different issue: spalling brick on the exterior chimney, driven by freeze-thaw, can affect a DuraFlex insert carried inside that flue. Different neighborhoods, different reasons for the call. That’s why a Windsor DuraFlex appointment starts with a look at the top of the chimney and the appliance, then goes down.
DuraFlex Models & Products We Service in Windsor
We service DuraFlex Pro, the insulated stainless flex liner, in Windsor homes that need a wood-burning appliance relined with insulation around the flue. We also work on DuraFlex SW, the uninsulated single-wall flex liner, found in shorter runs and straightforward replacements. DuraFlex Paramount, the insulated rigid and flex hybrid, shows up where a straight lower section and a flexible upper section meet. And we service DuraFlex Sure-Temp, the factory-built fireplace venting used with gas fireplaces that are common in newer Windsor subdivisions. Whichever configuration your home has, we match quality parts to your liner’s existing diameter and application, replaced only when the old component actually needs replacing.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Windsor
Chimney work in Windsor is priced per job by a written estimate, and the estimate is free. Because the repair stays within the sweep, inspection, and repair scope, there’s no second company to pay for a follow-up visit. What drives the number up or down is the appliance type, the liner diameter and length, how accessible the chimney is, and whether the job is a cleaning alone, a cap or top-plate replacement, or a liner installation.
We won’t quote you from the driveway. We’ll tell you exactly what we found and exactly what it costs to fix it, before any work begins. If a cleaning and inspection is all your DuraFlex system needs, that’s all we’ll recommend. Call (833) 740-1407 for an exact quote, and we’ll schedule the free estimate.
Serving Windsor, CO – Our Local Coverage Area
We serve Windsor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Windsor
Because the liner collects things other than creosote. Insulated DuraFlex liners serving gas fireplaces gather leaf litter, animal nests, and wind-blown debris that can block an air intake and cause lighting or draft problems. Windsor’s windy subdivisions see this regularly. Call (833) 740-1407 to book the inspection.
They loosen it. The downslope wind corridor works fasteners and top plates until the cap rattles free or flips, opening the flue to water and debris. Re-securing or replacing the cap with a wind-rated unit and inspecting the liner is the typical fix. Call (833) 740-1407 for an exact quote.
Yes. A DuraFlex liner is cleaned and inspected in place using a camera inspection and photos you can see for yourself. We only discuss removal if the liner fails the inspection or a support issue makes it necessary. Nothing is recommended without evidence.
It can. Freeze-thaw spalling on an exterior masonry chimney lets water into the flue, which can affect a DuraFlex insert carried inside it. The inspection tells us whether the flue can safely hold the insert as-is or needs repair first. Call (833) 740-1407 for a free estimate.
A Level 1 is a routine check of an appliance in service. A Level 2 goes further with accessible sections, camera views, and a report, and it’s the right call when you’ve changed your appliance, bought or sold a home, or had a wind event or a cap failure. We’ll tell you which level you need and why.
Service Areas Near Windsor
Windsor sits just south of Fort Collins and shares the same wind corridor and freeze-thaw winters. If your DuraFlex system is in Windsor, we can get to it. We also serve homeowners in Fort Collins, Loveland, and Wellington, plus Severance and Timnath, with the same sweep, inspection, and repair scope.
Book Your DuraFlex Service in Windsor Today
Ready to know what’s actually happening at the top of your chimney? DuraFlex systems are a specialty of ours, and the Windsor links above show the local work we do. Call (833) 740-1407 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Written by the team at Chimney Sweep Fort Collins.