Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Fort Collins Homeowners Choose DuraFlex Chimney Cleaning
We provide independent DuraFlex chimney cleaning service in Fort Collins, handling the flexible stainless liners, top plates, caps, tees and connectors that go with them. Because we’re not tied to DuraFlex, we can tell you honestly whether a liner needs replacing or just a proper sweep and re-seat. Fort Collins homeowners call us for DuraFlex work because we clean to the liner’s design, not around it.

We’re independent chimney professionals, not DuraFlex dealers, and we’re not affiliated with or authorized by the manufacturer. That independence is the point. It lets us look at a DuraFlex system in a Fort Collins ranch or bungalow and give you the straight answer about what it needs. Call (833) 740-1407. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Independent DuraFlex service, not manufacturer-authorized, so our findings aren’t tied to selling you a new liner.
- We clean smooth-wall and corrugated flexible liners to the material, and we service the top plate, cap, tee and connector that come with them.
- Fort Collins’s short, intense burn season builds creosote fast, which makes an annual poly-brush sweep the baseline, not a luxury.
- One call covers the sweep, the inspection and the repair. No handoffs.
Why Trust Chimney Sweep Fort Collins for Your DuraFlex Chimney Cleaning?
Our technicians have up to 15 years of experience, and a good share of that has been spent inside DuraFlex flexible liners. Flexible stainless systems fail differently than rigid clay tile. The corrugations catch creosote. The seams hold soot. The top plate either seals or it doesn’t, and when it doesn’t you find out in the firebox after a storm. We know how each of those shows up because we’ve cleaned and re-seated enough of them.
We specify materials by name because what goes inside your chimney matters as much as the labor. When a DuraFlex system needs a new top plate, cap, tee or connector, we use genuine DuraFlex components so the liner stays matched and sealed. When a quality aftermarket part fits properly and the material is equivalent, we’ll explain the tradeoff before we use it. That keeps the system warranty-safe: matched components, correct fit, no guesswork.
We’re a chimney specialist, not a generalist with a brush. We handle the sweep, the inspection and the repair, so the company that finds the problem is the same one that fixes it. In Fort Collins, that matters. A flexible liner that was brushed carelessly, or re-seated with the wrong cap, comes back to you as a draft problem the next winter.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Fix in Fort Collins
Fort Collins is a wood-burning town. Much of the core is 1950s to 1970s ranches and bungalows, many with a wood stove or insert now running on a DuraFlex flexible liner inside an older flue. That setup, in this climate, produces a predictable set of problems.
- Creosote and glaze clinging to corrugations and smooth-wall seams. Flexible liners collect creosote wherever the flue gas cools. A wood stove or insert run at a low, smoldering setting is the usual cause. The liner needs a proper poly-brush sweep matched to the wall type, not a chemical shortcut that leaves the deposit in place.
- Top-plate and cap seals degrading. The top plate is the liner’s roof. When its seal fails, rain and snowmelt run down the outside or inside of the liner. You’ll see rust staining, water in the firebox, or a damp smell after a storm. Snow and sub-freezing nights make this fail faster in Fort Collins than in milder places.
- Liner joints, connectors and tees working loose or corroding. Where the flexible section meets the stove collar or a rigid adapter, heat cycling loosens the connection and corrosion takes hold. A loose joint lets flue gases leak into the room instead of up the chimney.
- Sagging or misaligned flexible sections. If the top support wasn’t tensioned correctly, or an offset was handled poorly, the liner sags. Draft suffers and soot loads unevenly, so one part of the flue fouls while the rest stays clean. This is one of the harder problems to spot from the ground.
- Glaze creosote from concentrated burn bursts. Fort Collins’s frequent state-declared no-burn days push homeowners to burn in cold snaps, so creosote builds fast in a short season. Glaze on a DuraFlex liner is a real fire risk, and it’s the reason a swept chimney matters before winter, not in the middle of it.
A common pattern looks like this: someone with a wood insert on a DuraFlex smooth-wall liner notices weak draft and a heavy soot smell. A sweep finds the liner loaded with creosote plus a top plate pulled away from the crown and letting water in. The usual fix is a poly-brush sweep of the flexible liner, then re-sealing or replacing the top plate and cap with matched DuraFlex components so the flue stays dry and drafts correctly.
DuraFlex Parts & Our Repair-vs-Replace Approach
We start from the liner you already have. If the system is DuraFlex, we use genuine DuraFlex plates, caps, tees and connectors so the liner stays matched and sealed. A full re-line is only justified when the liner is corroded, crushed, or wrong-sized for the appliance. A sound liner with a bad top plate gets a new top plate, not a sales pitch.
Where a quality aftermarket part is equivalent in fit and material, we’ll use it and tell you why, so you understand the tradeoff. We don’t stock or sell OEM parts, and we’re not a DuraFlex dealer. We’re an independent shop that repairs and services DuraFlex systems with parts that fit them.
We’ll tell you exactly what we found and exactly what it costs to fix it, before any work begins. If the liner can safely wait a season, we’ll say so. Call (833) 740-1407 for a free estimate.
Our DuraFlex Service Process – Step by Step
- 1
Diagnosis. We inspect the flexible liner wall by wall, checking the corrugations or smooth-wall seams for creosote and glaze, and we check the top plate, cap, tee and stove connector. Camera inspection means you see what we see.
- 2
Repair or install. We sweep first, then re-seat or replace the component that failed with matched DuraFlex parts. If a re-line is genuinely needed, we install a correctly sized flexible system for your appliance.
- 3
Test. We confirm draft and seal, so you know the flue is pulling correctly and staying dry before the first cold snap.
- 4
Warranty-safe close-out. Matched components and correct fit keep the system warranty intact. We document what we did so you have it on record.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Products We Service & Install in Fort Collins
We work on DuraFlex SW smooth-wall stainless flexible liner kits, where the smooth wall is easier to brush but the seams still collect soot. We service DuraFlex Pro pre-insulated flexible liner systems, checking the insulation and seals along the run. We handle rigid-to-flexible components, where a rigid top section meets a flexible lower run, since that transition is a common failure point. And we service appliance connector and tee/cap kits for wood stoves and inserts, checking the connection at the stove collar and the tee at the base. Each of these gets the same careful look, from the top plate down to the connector.
We Also Service These Brands
We’re not dependent on one brand. Alongside DuraFlex, we work with HeatShield for firebox restoration, Gelco and Olympia Chimney and Famco and Copperfield across sweeping, inspection and repair. That range means when your chimney needs a resurfaced firebox or a different liner brand, we handle it under one roof instead of sending you to a second company to follow up on findings. A chimney specialist with brand depth, focused only on chimneys.
FAQs – DuraFlex Chimney Cleaning Service in Fort Collins
No. We are an independent DuraFlex service provider, not a dealer, and we’re not affiliated with or authorized by the manufacturer. That independence lets us give you an honest read on whether a liner needs replacement or just a proper sweep. Call (833) 740-1407 for a free estimate.
Yes. When your system is DuraFlex, we use genuine DuraFlex plates, caps, tees and connectors so the liner stays matched and sealed, and quality aftermarket only where fit and material are equivalent and you understand the tradeoff. We’ll tell you exactly what we found and what it costs before any work begins.
Most DuraFlex sweeps and top-plate reseals are done in a single visit. A re-line or a connector replacement takes longer, and we’ll give you a realistic timeframe with the written estimate. Call (833) 740-1407 for a free estimate.
We service DuraFlex SW smooth-wall liners, DuraFlex Pro pre-insulated systems, rigid-to-flexible components, and appliance connector and tee/cap kits for wood stoves and inserts. If you’re not sure which you have, we’ll identify it during the inspection.
Not when the service is done correctly with matched components and correct fit. Using genuine DuraFlex parts and sealing the top plate and cap properly keeps the system warranty-safe. We document what we did so you have it on record. Call (833) 740-1407 to book.
Cleaning is priced per job by a written estimate, so the figure depends on the liner, the amount of creosote and what the inspection finds. The estimate is free, and you’ll see the camera evidence before we recommend anything. Call (833) 740-1407 for an exact quote.
Book Your DuraFlex Service in Fort Collins, CO
If you have a DuraFlex flexible liner and it’s been a season or two since the last sweep, book an inspection before the cold snaps return. We’ll sweep, check the top plate and connector, and tell you exactly what we found and what it costs to fix it. Call (833) 740-1407 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fort Collins.